isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 100dp1t1b9m1qeh 2:1 7/2/2007 ST121040 c tn 1 1 panel mounting a 16139 new part release 6/13/06 ct note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 5 amps w/resitive load @ 120vac or 28vdc 2 amps w/resitive load @ 250vac 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. hardware to be shipped bulk: t100011 - lock washer, qty 1 t100015 - lock ring, qty 1 t100000 - hex nut, qty 2 t100016- "o" ring, qty 1 pos. 1 pos. 2 pos. 3 switch function none on on 2-3, 5-6 n/a 2-1, 5-4 2 13 circui: dpdt e-switch marking on opposite side 4 56 6 10.92 [.430 in] 12.70 [.500 in] 11.43 [.450 in] 3.96 [.156 in] 3 5 46 10.41 [.410 in] 2.92 [.115 in] n 7.52 [.296 in] 1.44 [.057 in] 25 ~ pos. 1 pos. 2 pos. 3 5.72 [.225 in] flat 1/4-40 uns-2a threads 1.19 [.047 in] 2.03 [.080 in] 4.83 [.190 in] .76 [.030 in] 4.70 [.185 in] epoxy seal 5.95 [.234 in] n 6.35 [.250] 100dp1t1b9m1qe (t121040) b 16874 fixed markings/notes 1/16/2007 tn c 17430 added "o" ring to hardware 7/2/07 tn
|